高额定电压小直流电压试验报告台仪（耐电弧放电试验报告台仪）-（确定机把控好）

High voltage low current tester (arc resistance tester) - (computer control)

产品的分类：耐电弧试验机

Product name: electric arc resistance tester

成品类型：NDH-A

Product model: NDH - A

够满足的标准：GB/T 1411-2002《固态电绝缘建材耐高低平电压电流焊弧释放电能的做实验的时候》（同等IEC  61621-1997）及ASTM D495等规定的要制定创造的，并符合标准IEC 149、UL 746A等可靠性试验做法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

首要可用于位置及功能性：

本试验报告机是按应用软件于电机的、设备和家装设备等职业的焊工用可塑料件、硅橡胶胶和接地漆等接地原料的耐弧光使用效能评定标准，主于粉末状接地原料如：可塑料件、溥膜、硅橡胶、黑云母、陶瓷图片、的玻璃、接地油、接地漆、瓦楞纸板等物料的耐弧光使用效能检查；

本可靠性冲击试验机由折算机管理启动，能否展现到现阶段科学實驗英文壮态及科学實驗英文精力，科学實驗英文结尾后并手机截图到现阶段科学實驗英文数据统计，并可彩印.标准规范进行实验数据。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该机为左右一体化形式，下面为运行系统的，上侧为可靠性湿热试验箱。

2 本食品适用*新智力把握技术应用，能够 使用系统软件（IEC或ASTM）可智能来做实验的时候，并在笔记本上信息显示可靠性试验进程和没想到。

3 **特点积极，抗电磁干扰程度强，测试测试精度等级高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧放电通断时候误差率：大于 ±10ms

2 调压器存储空间：2kVA

3 額定冲击试验线电压：12.5kV

4 检测电流电压准确度：±3%

5 直流电调整计算精度：±10%  直流电压测试精密度：1.5%

6 电极片对制样负压：（0.5±0.05）N

7 探针涂料：钨棒

8 电级离：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 选用环境的温度：（23±2）℃

10 实用条件室内湿度：（50±5）%

11 外接电源：220V±5%  50Hz  10A

12 疲劳试验    措施：   标准/美标/10 mA 间隔/20 mA 连着/30 mA陆续/40 mA反复

13 耐压源程序内容如下：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 护肤品机型：

NDH-A    耐焊弧疲劳试验仪-微机操作

NDH-B    耐电弧放电检测仪-接触屏抑制

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！